How To Sew Rolled Hem Without a Rolled Hem Foot

heather handmade sewing

This post may contain affiliate links.

Learn how to sew a rolled hem without a rolled hem foot. This is a great way to create a really tiny hem in lightweight fabric.

I love the look of a tiny rolled hem in lightweight fabric. It’s just so little and perfect, and it’s almost invisible. It doesn’t affect the drape of the fabric at all.

Being able to sew a rolled hem without a rolled hem foot is a great basic sewing skill to know. In this post I will teach you two different ways to sew a rolled hem. A rolled hem is also called a narrow hem, takes precision to sew, and it’s perfect for lightweight fabrics.

How to Sew a Narrow Hem // HeatherHandmade.com

What is a rolled hem?

A narrow hem or a rolled hem is a really tiny hem perfect for lightweight fabrics. Rolled hems look professional and would be impossible to hem like regular double fold hems. I sew rolled hems two different ways, and they each have their time to be used.

I will say that it is not the fastest technique, but it looks really good. It’s used by professionals, but it’s easy enough for anyone to sew.

how to sew a rolled hem

You can buy a special foot to sew rolled hems, but I find them difficult to use. They take a long time to learn and getting used to, and I found even after I learned that I would still have to unpick a part of every hem I did.

You will see a rolled hem on any lightweight material, sheer or not. It’s perfect for high low hems since it looks good on the outside and on the inside. It’s also used a lot on formal dresses. Learn more about all the basic sewing stitches you need to sew clothing.

how to sew a rolled hem

How to Sew a rolled hem without a rolled hem foot when constructing clothing

Sew a straight line along the bottom edge. Sew 1/4 inch to 1/2 inch from the edge or at the hem line given in the pattern.

rolled hem without rolled hem foot

Iron the hem allowance up towards the inside of the garment on the stitched line.

iron rolled hem

Trim the fold down to 1/8 inch with scissors. Be careful not to cut into the garment. I like to use duckbill scissors* for this step because it helps prevent cutting holes in the wrong place.

sew a rolled hem

Don’t worry about the cut line being perfectly straight.

sew a rolled hem without foot

Fold the hem up one more time and iron it.

Stitch in between the two folds to enclose the raw edges.

sew a narrow hem

If you have a corner then do each rolled hem separately: one first and then the other.

rolled hem with a corner

How to Sew a rolled hem with a rolled hem foot when altering clothing

I use this method whenever I’m altering a finished garment. I most often use it when hemming a garment for a client like this wedding dress where I added a front godet.

Put your dress or skirt on and mark where you want your hem to be. DO NOT CUT IT. Mark with your favorite marking tool.

hem a skirt

Fold the marked line with the hem allowance towards the back. Sew 1/8 inch from the fold in matching thread through both layers of fabric.

hem a wedding dress

You will have a some excess on one side of the hem. This is what it looks like looking at the inside of the dress.

rolled hem on wedding dress

Trim the excess fabric off as close to the stitching as possible. Be very careful not to cut into the other side!

chiffon and rolled hem

Don’t worry if the trimming is uneven because it won’t be seen.

how to hem chiffon

Roll the fabric towards the inside of the garment and enclose the raw edge. Sew 1/8 inch from the fold. Overlap the stitches so that stitches lock.

rolled hem without rolled hem foot

Press your beautiful rolled hem.

I used a rolled hem on my pleated Harper skirt to have an overlay that looked nice when it moved.

How To Sew Rolled Hem Without a Rolled Hem Foot

How To Sew Rolled Hem Without a Rolled Hem Foot

Yield: One Rolled Hem
Prep Time: 20 minutes
Active Time: 20 minutes
Total Time: 40 minutes
Difficulty: Beginner
Estimated Cost: Free

Learn how to sew a rolled hem without a rolled hem foot. This is a great way to create a really tiny hem in lightweight fabric.

Materials

  • Skirt or dress to be hemmed

Tools

  • Sewing tools
  • Sewing machine

Instructions

How to Sew a rolled hem without a rolled hem foot when constructing clothing

  1. Sew a straight line along the bottom edge. Sew 1/4 inch to 1/2 inch from the edge or at the hem line given in the pattern.
  2. Iron the hem allowance up towards the inside of the garment on the stitched line.
  3. Trim the fold down to 1/8 inch with scissors. Be careful not to cut into the garment. I like to use duckbill scissors* for this step because it helps prevent cutting holes in the wrong place.
  4. Don't worry about the cut line being perfectly straight.
  5. Fold the hem up one more time and iron it.
  6. Stitch in between the two folds to enclose the raw edges.
  7. If you have a corner then do each rolled hem separately: one first and then the other.

How to Sew a rolled hem with a rolled hem foot when altering clothing

  1. Put your dress or skirt on and mark where you want your hem to be. DO NOT CUT IT. Mark with your favorite marking tool.
  2. Fold the marked line with the hem allowance towards the back. Sew 1/8 inch from the fold in matching thread through both layers of fabric.
  3. You will have a some excess on one side of the hem. This is what it looks like looking at the inside of the dress.
  4. Trim the excess fabric off as close to the stitching as possible. Be very careful not to cut into the other side!
  5. Don't worry if the trimming is uneven because it won't be seen.
  6. Roll the fabric towards the inside of the garment and enclose the raw edge. Sew 1/8 inch from the fold. Overlap the stitches so that stitches lock.
  7. Press your beautiful rolled hem.

Recommended Products

As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.

How much did you LOVE this project?

Follow me on Pinterest for more and use the little pin button at the top of the post!

If you make something using this tutorial, Iā€™d love to see! Please share it on social media with the hashtag #heatherhandmade and tag me! 

How To Sew Rolled Hem Without a Rolled Hem Foot
heather sewing

I believe small sewing moments can create great joy. Find your own ā€œrightā€ way to sew. -Heather

Subscribe
Notify of
22 Comments
Inline Feedbacks
View all comments

Thank you. I can see how this would prevent some of the usual problems.

My question, though, is whether this method will work for curved hems. I just put a rolled hem on a 1/2 circle skirt and am planning to make another, in a lightweight cotton.

What sewing machine needle should I use for fine thin scarf fabric?

Thank you so much for all you posts. I am following you from South Africa

I have a very diffucult time keeping the fabric on an 1/8″ line. It keeps slipping to the left. I tried adjusting the tension, holding and guiding the fabric different ways, still slips. Tips please, I have to get the cone for a wedding.

this is the way i’ve always done hems and seam edges this is the way i was taught in school along time ago

Your technique was really helpful. Thank you so much.

Heather…I am working on a prom gown of stretch material. Would you make any technique modifications? Thank you

Heather, does this method do nicely on satin as well? Thank you.

Yes! I've used it on all types of woven fabrics with great results!

Thank you so much!

this is one of the most helpful tutorials I have seen!! I have always wondered how people get the perfect finish on the rolled hem, specially on flowing fabrics! It was driving me crazy thinking of doing the rolled hem by a rough hand stitch first and getting it right..I am definitely gonna try this out šŸ™‚

So you fold it, sew it, fold it again and sew it again? All folds to the inside of the garment?

Yes this is right. Don't forget to trim the seam allowance after the first folding and sewing.

Thank you, thank you, thank you! I can't purchase my special foot yet, but I want to get started so this is just what I needed. Thanks again!

Excellent tutorial! Your way is soooo much simpler… especially since you don't cut until after you sew… makes it so much easier to hold onto the fabric! Thanks for sharing this tip…

You are a life saver! I made a deal with my mom, if I hem her skirts that are to long she's iron my families laundry. I took her first skirt home with me and could not figure out how to get a nice rolled hem, I really hope I can figure this out, I did already cut it so I guess I'll just have to make it a little shorter? Just found you blog today, LOVE it!

Mm hm. Sometimes I wonder why we have to make it so much harder for ourselves.
Great tip!

I will definitely be using this trick – thanks!

That is FANTASTIC! So much easier! Thank you :)))